Originally Posted by
dagsom
People with a Tekin SC4X 4.5... what motor temps are you getting? With what gearing?
Originally Posted by
Keeferton
I am running the MMP with the 3800kv motor and it does very well. Nice and cool. I am running 16/62, and have set the timing at 30*. The fan has yet to turn on the MMP. I am also planning to get the pro4 motor and run it on the MMP, as long as the software and sensor don't have problems i think this esc should do fine.
I run the same set up, it works great. Fan never comes on on the MMP, never temps over 100.
Just a heads up, castle doesn't recommend adding timing to a sensorless motor. I called and spoke to a fairly knowledgable person there (forgot the name), and he basically said you get about 2% more power with 5-10 degrees of heat per every 10 degrees of timing added (sensorless). I dropped my timing, no noticeable speed difference (still ungodly power!) and down from 150s to 130s.