Originally Posted by
Bubblehead
My first weekend of racing with my RC8Be. I had a push entering high speed sweeper, after talker to a few racers I'm thinking of going with 5,7,3 I ran the stock 5,5,5.
What would be a better fix for a push entering a high speed sweeper? I know slowing down would fix the problem, but other buggy's are carrying more speed.
I was having this same issue.
5,7,3 is a good start. I personally brough down the front suspension out to the outter hole on the A-arms, the rear to the inner, lowered the front down one hole and the rear down 2.
My camber is at -1.5 degrees and I decided to toe in 1 degree.
Also, tires tires tires. Can't stress that enough. My set up isn't completely dialed in yet, but I felt I had some more bite with this.