R/C Tech Forums - View Single Post - SC10 4x4 Thread
Thread: SC10 4x4 Thread
View Single Post
Old 06-09-2011 | 05:07 AM
  #3028  
FRONTI3R's Avatar
FRONTI3R
Tech Regular
iTrader: (8)
 
Joined: Jan 2011
Posts: 342
From: Ottawa, ON
Default
Originally Posted by Shark413
I love my SC10 4x4 but one thing is a real pain, changing or adjusting the pinion. It basically requires you to pull the entire motor out. So I decided to do what AE should have done for us. I drilled a hole thru the bottom of the chassis that lines up with the pinions grub screw. So now I can stick a wrench in the hole and loosen the pinion grub screw to adjust or remove the pinion.
I leave the motor on and use an allen key to tighten and loosen the grub screw on the pinion! Works great for me every time, and I've built 3 of these trucks.
FRONTI3R is offline  
Reply