MurfDogg "Sensor-Saver"
Introducing the new MurfDogg "Sensor-Saver".
Many of today's servo manufacturers are building bigger, stronger, faster servos than ever before. Unfortunately, they are not taking into consideration that many of these servos will be used in vehicles with sensored brushless systems. The problem is that the sensor systems are powered from the BEC voltage provided by the receiver. Many of these big servos are drawing more voltage than the BEC can give out while maintaining proper voltage output to the ESC's sensor system, which in turn takes away the ESC's ability to provide sensored motor running.
The solution: The MurfDogg Sensor-Saver! Simply plug the Sensor Saver into an open slot in your receiver, and then the Sensor-Saver does the rest! The Sensor-Saver stores energy just in case your servo decides to overdraw the BEC system, which can keep you running trouble free!
We suggest the Sensor-Saver if you are using any of the following servo brands(known to overdraw the BEC):
-Savox
-KO Propo
-JR
-Spektrum
-Orion
-XP
MurfDogg Sensor Savers are available in two different lengths:
- 3.75" total length, for use when the Sensor-Saver must be mounted close to the receiver.
- 6.50" total length, for use when the Sensor-Saver can be mounted remotely.
Part #'s: SS-LONG, and SS-SHORT
Price: $8.00 each
Available now!