Switchpoint question
my understanding is once the motor hits the switchpoint it creates higher boost
Here are the manual switchpoint advice
9,5 -13,5 T -> 8000 U/min - 12500 U/min
6,5 T 17000 U/min
modified > 30000 U/min
and Martins advice
For 10.5/6.5 the switchpoint should be between 15 – 25000
For Modified 5.5T 25000
4.5T 35000
Does anyone know if these numbers are also to be used for 12th scale or should it be lower due to voltage?