R/C Tech Forums - View Single Post - Tune With Camber Links
View Single Post
Old 06-05-2011 | 08:21 AM
  #25  
t0p_sh0tta's Avatar
t0p_sh0tta
Tech Elite
iTrader: (35)
 
Joined: Aug 2009
Posts: 4,863
From: Connecticut
Default

Originally Posted by Sarinexia
While I do my balancing I think I will test this collar question by simply pressing down on one side of the suspension and then releasing it to see the recoil with the collars all the way put. Then I will tighten them down significantly and perform the same test. Each test with just springs and without shock oil. If the spring rate remains the same (which I suspect it may) I'll be convinced
As you tighten down the collars, you'll also be changing the ride height. As mentioned earlier, adjusting the collar is solely to change ride height, and not spring rate.

Originally Posted by chop73
How does this dictate over wieght transfer? like if you need more forward bite? I reallyt like this thread and it makes sence just curious on this.
There are several other things you can do to increase forward traction. I don't know your setup, but you can add toe, anti-squat, weight, select the right tire, soften the suspension, shorten the wheelbase, etc. etc.
t0p_sh0tta is offline