Well... I've got the following in my kit and I'm not even finished yet:
- One bad diff. One cross pin was way too long, about one mm longer than the other and was almost impossible to get out. Oh, and the diffs had no oil.
- I missed one 12mm screw for the shock tower assembly. Instead I got a 16mm.
- On one side of the pre-assembled front suspension they had mixed the 12mm and 14mm screws going through the spindle into the hub and the A-arm.
- One of the shock rod ends was not screwed on straight and the threads in the rod end was nearly stripped.
- Two shocks had no thread lock and one shock spring is bent rubbing the shock body severely.

I had pre-ordered the kit so I guess I got one from the first batches. I'm not too impressed by the quality control... Why pre-assemble things when they can't do it right?