hi guys,
i m writing here because i m new to 1/12

after a year of 1/10 racing i decided to buy a frind for my tc6..
infact 2 days ago a purchased an 12r5 (first model) which is on the way.

in the meanwhile it is coming i would like to ask some question, i think easy questions for all of you..

-may i use both my lrp stock spec mk3 and my npsram pearl spec for 1c lipo, right?

-talking about servos, there is any way to install a normal servo on the car, or i do need a mini servo?
and in this case, which do you find better? i usually run savox servos, and i have on 1251 which i would like to use,but i think it is a little bit overdimentioned (not in dimentions) in terms of torque,
it is 9kg while i saw all 1/12 servos with like 4/5 kg max?
what do you suggest?

-and about the shell, i m going to buy a protoform speed 12 gtp,
just because it is the one i like most,
but there are any indications for the shell like we have in touring for the speed 6, the ltcr and so on...?

-finally a simple question about the motor,
i decided to strt with lrp 10.5 t stock spec, just because i have a spere one and also casuse people told me not to start with 5.5 or 4.5 or anything under 10.5
in this case i should drive the same final ratio the 10.5 have in touring?
do i need to be 6-6.5?

thanks everyone for your patience,

i rellay need to solve this doubts!

p.s. my tracks are carpet only!