Hey guys I need a little help here. I am helping a friend put together a
FT RC8BE. He has a Tekin RX8 with a T8. The wire that goes from the ESC to the receiver seems to be to short. The ESC is mounted so the wires are as close as they can be. The plug just pokes through the receiver box. I have double and triple checked the routing of it and there is no way its wrong or could really go any other way to help. I spoke to a tech at Tekin and he said it should be 10 inches long. I took it apart and measured it and it actually measures 10.5 inches yet its definitely still to freekin short. I thought about using a servo extension but I just dont like that idea much. Plus the plug is like half in half out of the receiver box. No good.