[QUOTE=turbowop;9174009]For those wanting to use the 8ight shocks, it's simple. They bolt right up. The top requires the use of the Losi upper bushings, which are narrower, so you just have to install a 5mm spacer behind them. I used a small bearing for now. If you use the stock upper bushing, the Losi shocks will flop back and forth on the longer bushing too much. Using red springs with adjusters backed all the way out, the ride height is damn near the same as with the stock shocks/springs with the adjusters backed all the way out.


[/QUOTE

Is there any need for the Losi front & rear shock spring sets or are the red springs sufficient.