Originally Posted by
joehpisavage
all you had to do was set your charger to nihm and charge it for a minute to get a charge on the cell then you could charge the battery on normal lipo charger but make sure you are standing next to the battery for that 1 min or less
this is true you can do the above to sometimes bring an unusable lipo back to life, but remember once a pipo has had any of its cells discharged below 3v the pack it has been permanently damaged and although the pack may work fine for a while it will never have the same perforamnce as before and its usable life span will be shorter so i would only attemp as a last resort. (i recommend very low amps till the cell voltage is brought above 3v and be very careful when doing this that you DO NOT FULLY CHARGE THE LIPO ON NIMH SETTING or fire could result! and as with any lipo in question be very careful and charge away from anything flammable)