Originally Posted by
Gabriel2010
I have a problem with my Tekin RX8 with a 2050kv motor. It shut off 3 times last week and I don't know why did that ???? Any one has an Idea why ??? It happen after the jumps. It smack the chassis on the landing. I also have a brand new Batt Max Amps 6500 4s 150c. any Ideas ???
Few ideas:
1. Your on/off switch isn't mounted in the hotest location and knocking off after jumps (although I'm going to assume you would have realized that already).
2. Check the holes on the bottom of the TEKIN. If it has 3 that is the older RX8 model. They had issues with the circuit board having a bad connection. Contact TEKIN and they will replace it for you.
3. Check all of your solder connections.
4. What kind of connectors are you using from the ESC to the battery? They could be a culprit as well.
It's most likely one of these suspects.
You might want to subscribe to the TEKIN thread for these questions. Randy is really good about helping people with their TEKIN gear. He can hook you up.
Buon giorno!