Hey again guys, im having a bit of troubles still with the trucks setup. Now i run on mostly dusty 1/8th tracks, and currently my setup is:

30 weight in the front-no rebound-bladders

25 weight rear- no rebound- bladders

over drive in the front

stock ride height, but lowered in the back to make equal front to back.

5mm washers under the front ballstuds

And im running m2 calibers all the way around.

Now the truck is quite good, but still fairly loose in the rear. On long sweeping corners it wants to drift out, and sometimes on the tight corners too, if i get too carried away with the throttle.

Anyways i was just wondering if this can be fixed or helped any further? It just seems like the truck has way too much give in the back.