R/C Tech Forums - View Single Post - Tekin RX8 1/8 Scale Brushless ESC Thread
Thread: Tekin RX8 1/8 Scale Brushless ESC Thread
View Single Post
Old 05-23-2011, 10:52 AM
  #11778  
JayL
R/C Tech Elite Member
 
JayL's Avatar
 
Join Date: Mar 2006
Location: Ca
Posts: 3,111
Default
Originally Posted by JayL
Randy: hook me up with some setup, please. SpeedWorld and LSR for new sc10 4x4 with RX8 and SC4X 4.5T, any place to start would help. I have full hotwire etc. Remember I asked you during the SWR enduro on the drivers stand about the SC10 4x4 and I blocked you the whole race
Originally Posted by Randy_Pike
It was you!? lol

I'm basically running what Ryan Lutz has on his setup. The SC10 is very close gearing wise to the durango. But LSR is tight right now on the layout so for the sC10 try a 13T.

http://www.teamtekin.com/hotwire/ESC...sc410r_4-5.pdf

Just ran at LSR. I used a 13t pinion, 62 spur. motor temps 110-120 6 mins
forgot to temp esc

it feels kinda flat to ok at the bottom and middle then comes on like crazy at the top, kind of like a positive expo throttle map
running throttle profile 3
not running any timing in the esc setup
would a gear change flatten it some?
it was very smooth and easy to drive, I won every round and the main
JayL is offline  
Reply