R/C Tech Forums - View Single Post - lipo question
Thread: lipo question
View Single Post
Old 05-21-2011 | 03:23 PM
  #2  
BigRM's Avatar
BigRM
Tech Regular
 
Joined: Mar 2011
Posts: 250
From: Courtice, ON
Default

Cell count can be determined by the balance plug. Set your ESC and run it (carefully) down to 3.2V/cell. Top it up and check the charger to determine the approximate capacity. No way to check C-rating though, so I would reserve the pack for testing instead of bashing or racing.
BigRM is offline