I only played around a couple times with the Mulsanne, but found with a bit more camber up front, it was fine. I suppose if the manufacturers would produce a couple other styles, they could get a bit of the front downforce needed. They do it with 1/12th bodies. There is quite a range to use depending on what you need and like. Same used to be true of 1/10 pan car racing bodies, back when I had a few less gray hairs.
Originally Posted by
NiMo
I tried one, couldn't drive it, trashed it after only 2 meetings.
Too much rear end downforce and not enough front, meant having to increase the steering lock which caused car to hook coming out of corners.
Went back to the PF Corvette (outdoor 2s 17.5 racing).