View Single Post
Old 05-20-2011, 06:00 AM
  #178  
Grinder
Tech Master
iTrader: (2)
 
Grinder's Avatar
 
Join Date: Feb 2003
Posts: 1,858
Trader Rating: 2 (100%+)
Default

Originally Posted by yappy View Post
whats factory needle settings for the .21 ?
A good base setting for the .21 Torque is as follows.

High Speed Needle = 3 turns out
Low Speed Needle = 4 turns out
This is flush with the housings on both needles.


The factory settings are 1/2 turn leaner than what I have listed above.

For break in, I would start 4 turns out on the LSN, adn 4 turns out on the HSN.
Grinder is offline  
Reply With Quote