Yep
and you may already have more stuuf than you realize. Wire cutters, needle nose plies, a good channelock pliers for the flywheel, superglue, small-medium screwdrivers, metric sockets, nut driver, small file, sandpaper, oil, grease, calipers, xacto blades...Double sided tape....then after building up your box with the stuff you already have, then fill in the voids with specific tools...Like flywheel puller, Hex wrench sets 1.5, 2.0, 2.5... Charge leads of different types. Extra glow ignitor because those dissapear....Tuning screwdriver...Extra servos, a arms, small drill with drill bits, dremel with cutting disks, sanding drums, wire wheels, Wd 40, soldering iron, deans plugs..Different sizes of washers and shims and screws that actually fit ur car....It may take time to find out what sizes you need more often....Especially engine mount screws, and small 2.0mm head screws that strip out sometimes...You don't have to buy the most expensive stuff, jut lots of little things that add up.....