R/C Tech Forums - View Single Post - Savage XLE FLM Build
View Single Post
Old 05-15-2011, 10:11 AM
  #15  
Jstall7543
Tech Elite
iTrader: (2)
 
Jstall7543's Avatar
 
Join Date: Jul 2009
Location: Down Town Olympia
Posts: 3,106
Trader Rating: 2 (100%+)
Default

Originally Posted by tightdog1
First off awesome truck, I'm considering building one of my own from the ground up with the FLM Tranny Forward Kit. But I wanted to know what the battery box size was, or what the biggest battey you could fit in there is?
Thanks, It would help out a lot, Ive searched all over but couldnt find a straight answer. I have some batteries from my E-maxx that I was gonna use, but sounds like you didnt like the idea of 2 batteries stacked in there.
The largest battery is 165L x 44.4w and as tall as you want to go around 95.mm tall is the bigges 6s I've had in there with no chassis spacers used. You can go wider depending on the pinion size you end up with. With 5s 4200 45c I'm running 20t and 25t on the tekin 1350kv truggy motor, with this motor esc and motor and 20t the temps are at 100esc/motor all day long. With 25t the motor hits 145, esc110. 70deg weather. I found that with the 2200kv hpi motor and the bigger cen tires/wheels the temps were to high. Temps were ok with the stock terrapins or smaller on 6s 35c 5000. But I really like the cen wheels and tires, they make it a beast! I'll put up my test run videos here in a bit!
Jstall7543 is offline