R/C Tech Forums - View Single Post - SC10 4x4 Thread
Thread: SC10 4x4 Thread
View Single Post
Old 05-15-2011 | 06:11 AM
  #983  
symmetricon's Avatar
symmetricon
Tech Elite
iTrader: (27)
 
Joined: Jun 2009
Posts: 4,882
From: houston
Default

I got to race mine yesterday, and had a blast. It was my first 4x4 sct race in over a year. I used some medium gladiators and they were hooked up when the track was wet. Made it into the A mains, got into 3rd after 2 laps, and my only complaint is if you are racing against guys who like to bump, the truck gets upset easyer than the others, so I got bumped around and crashed, got put in last, worked back into the middle and finished. Oh, and going down the straight we have a 90deg turn, my truckk wanted to roll. It would definatly benefit the truck having some swaybars, just ordered the losi swaybar kit. The truck easily outrurned any other truck on the track, once I get the swaybar kit I should be able to hit the turns harder.

On another note, Im using the castle 1410, and my motor temps wer 160 running 32p 14t pinion. The top end was a little slow. Also my speedo was running pretty warm 160ish, usin a HOBBYWING SC10 esc, but the combo and truck was buttery smooth. Not sure if the heat is from some binding in the tranny? Today after church Ill tear it down ad double check.
symmetricon is offline