Quote:
Originally Posted by Mr. MR4
Did a couple of runs with my Tekin RS Pro in 1/10 TC (2S Lipo) GM 13.5 motor.
The problem I am having is that the time the turbo seems to be kicking in is varying, and some times it doesnt at all!
I have resoldered the wires, changed the sensor cable, put a new capacitor, done a factory reset and changed the motor and put up the epa on the transmitter (KO Propo) and problem is still there.
Any other suggestions?
Originally Posted by
Randy_Pike
This is either a setup that is off, or a radio system issue. So since you're using a KO are you calibrating the esc at 100/100 and bumping up the "hi" point to 105?
What is your esc setup? How big is the track? What is the layout like?
Hi Randy,
I tried out the same setup (Hara's IIC Setup with boost 18 instead of 14) with a speed passion 13.5 motor (motor timing 10 deg) and the speedo worked fine and was quick all day. Could it be that I have to use different settings for the GM (97294)13.5 motor? (No motor timing and 12.3mm purple ring rotor)
Track is technical with 2 hairpins and 80 foot straight .
Thanks
Karl