Originally Posted by
Dragrcr
Well I found another goof up, while building the tranny, in the manual it says to slide the idler gear on with the skirt side away from the London side of the top shaft for both front and rear, however the AE tips video specifically says to pull the top shaft out a bit and install the idler gear skirt in, on the same side as the longer top shaft. So what way is it supposed to go?
I'm gonna toss it in the trash if I have to tear it back apart!
If you look closely, you will see that in the manual the first load the gears into the right-side of the transmission case, in the video they are loading the gears into the left side of the transmission case.
So, both the manual and the video are correct, the just built them in a slightly different way.