COBRARACING,I'm running with an X12 13.5
fdr 6.64
Boost 34
Start rpm 4000
Turbo 0
ACC 350
Hopefully a conservative start (although it sounds pretty lively on the bench) and I can work from there considering performance and temps.
Any setting suggestions for more optimal setups gratefully received.
Cheers,
Nick
My X12 13.5T Which I run in my 1/12 scale really loves the 1224 Firmware!
Mind you 1/12 scale is 1S lipo, but it's worth a try!
The 1224 FW never made it to the Hobbywing site, but you can still get it from Cobra his site...
If you are willing to give it a try:
- Download it and install it in a
seperate folder on your PC, so you can always swap to any release ever made!
- With the PC program V1.63_110310 downgrade your ESC to V2.0_...518,
- then downgrade Your 2 in 1 box to V1.07_101224
- then with the PC program V1.63_101224 upgrade your ESC to V3.0_101224....
ESC settings can not be made with the PC program, that was a bug, you need to change the settings with the 2 in 1 box.