R/C Tech Forums - View Single Post - Go Engine USA 2011 Thread
View Single Post
Old 04-29-2011 | 08:13 AM
  #1365  
bigmatt's Avatar
bigmatt
Tech Master
iTrader: (16)
 
Joined: Mar 2008
Posts: 1,485
Default

Originally Posted by PUDDIN
Matt I got the carb i will check it out and run it on my motor next weekend.
Good luck!! If you slowly slide the lsn assembly in and out you will notice it has a catch in it. Also look under the carb boot it should still have oil residue in it from the nitro. To me the whole slide assembly seems loose. I also put a new seal on the lsn. Thanks for taking the time to look at it Puddin. I know you have been watching what you eat,but you have earned 1 bonus pudding cup of your choice! Don't get the low fat one either, they are worse for you then regular.
bigmatt is offline