R/C Tech Forums - View Single Post - Speed Passion Thread
Thread: Speed Passion Thread
View Single Post
Old 04-26-2011 | 10:36 AM
  #100  
cjtamu
Tech Master
iTrader: (12)
 
Joined: Jul 2006
Posts: 1,229
From: Bay City, TX
Default
Originally Posted by Solara
Once you downloaded the V1.35 onto your computer, you DO NOT need internet access to access your firmware...you just need your LCD programmer card to connect your ESC to Computer and let them do the talking. You choose your SOFTWARE within at trackside or practice, without any WI-FI required...

But you will need your COMPUTER and LCD Programmer card in order to change software....you just need your LCD programmer card if you want to change setting but using the same, installed software.
Bingo. I thought when you ran through the list of available updates from the USB software they were being loaded from the website, but sounds like I was mistaken. So, when you load the latest USB software (V1.35 right now), the various ESC software profiles are loaded onto the computer with the USB software? Sweet. I already have the LCD programmer and have been changing software, just wasn't aware I could do it without internet access.
cjtamu is offline  
Reply