I current run a tekin rs pro in 21.5 but with turbo. I am entering a competition which run 21.5 spec. I know I have to have 212 software but how do I change the esc to spec like the usa competition. also is there any other information or settings I need to change?
Thanks
You can quickly change to blinky (zero timing) mode by turning on the ESC , then press the mode button 5 times (until TP light is lit) then press the INCR button until only the first light is lit. Or you can set it to timing profile 1 through the hotwire.
In blinky mode you can adjust everything else, just not the timing/turbo
You will probably also need to lower your FDR. One of the classes I race is a 21.5 class that allows boost, but most of the time everyone runs non-boosted. For boosted I used an FDR of 5.0, but for blinky I use 3.8 (Duo3 motor). Some places have a minimum FDR rule, so you might want to inquire about that.