Originally Posted by
chiro972
I never mess with expo or rates on my steering, but the endpoints will vary by radio and by little differences in your steering linkages from setup to setup, but if the travel setting is set to give you full throw without the servo stalling against the end of available throw in the car (buzzing stopping is one way to tell) then you should be good.
i fly 40% rc planes running 3 servos per wing half.we have to match each servo to the others.
the meter listed in this link allows you to check current/votage readings to see if you are binding thru the travel and end points.
i use it on all my rc cars .this way you know exactly when you are at the end of travel.also will show if the servo is having faults.
very easy to use,just hook the leads inline with the servo being tested.
http://www.amainhobbies.com/product_...-Current-Meter