R/C Tech Forums - View Single Post - Dyno, Homemade, Using a Novak Sentry Data Logger, Continued, The Experimental Thread.
Old 04-20-2011, 08:52 PM
  #243  
James35
Tech Fanatic
iTrader: (1)
 
James35's Avatar
 
Join Date: Nov 2005
Location: Las Vegas, Nevada
Posts: 752
Trader Rating: 1 (100%+)
Default

Thanks John. You are the man!

FYI: For those doing single cell testing, I've been thrilled with the Mean Well 5V 120A (HRP-600-5)_power supply (120A continuous, 162A peak). It cost me $180. I was able to adjust the voltage down to 4.220V.

I recently discovered the SE-600-5 model for only $115 or so. (Currently, there's 10 available on ebay for only $67!) Not sure why the 2 models are so different in price. Mean Well also offers 7.5V versions which can be adjusted to 8.440V. I'm sure there are other brands out there to, but Mean Well was the best I've found yet for the price.

Last edited by James35; 04-20-2011 at 09:08 PM.
James35 is offline