R/C Tech Forums - View Single Post - Speed Passion Thread
View Single Post
Old 04-13-2011, 05:51 PM
  #28  
bathsoap
Tech Rookie
 
Join Date: May 2010
Posts: 10
Default

Originally Posted by kwiksi
The V2.1 comes with 528 stock. I just picked up another and that is what was on mine. I loaded 212 right away.
Your gearing is way off. Good for non boost, but you need to gear like a mild mod. What buggy you running? I'd start maybe with a 76/78 spur depending on the tranny ratio and pinions in upper mid 20's. You could always start with the default settings which are pretty mild. Check temps every few laps.
You could try my setup from the first page and just adjust gearing for a buggy.
At my club we can only run non boosted 17.5t in the stock class.
I'm running a tamiya trf201, also with the speed passion fan you get included with the esc. Do they suck down or push away?
Does the 528 software have the boosted function on it?
bathsoap is offline