R/C Tech Forums - View Single Post - Go Engine USA 2011 Thread
View Single Post
Old 04-11-2011 | 04:27 AM
  #1045  
grizz1's Avatar
grizz1
Tech Elite
 
Joined: Nov 2007
Posts: 2,983
From: Auckland, New Zealand
Default

Originally Posted by kiwi79a
Hey Shane
I am looking at working at getting my GX11-5RHO broke in this weekend,
I am going to be using Odonnell 97T plugs, and 25% pure fuel is this a good mix or should I change to 30% as I see you recomend 77T plugs for 25% nitro.
I have a lot of 97T plugs so I want to use them up. I also have RB #6 plugs

Should I use up my 25% and change to 30% Pure?
Also do you have any more motor pipe combos left as I want to get another as a spare. (I want to get a Truggy eventually)

Cheers

Stu
Hi Stu. Yep, the O'Donnell 97T is a sweet plug with the Pure 25%. I do stock the 77Tīs as a winter plug for later on when it gets colder, but the 97īs will be fine, especially if you plan on going to 30% later on.
30% will give you a bit more snap and crisp response, but your run time will drop a little on the higher percentage fuel. 25% is plenty for racing, but if you want maxiumum power, then 30% would be the go.

Use up the 25% for break in as it will be a little easier on the motor when it is brand new and really tight. Good to see your using the good fuel there mate
I have combo kits in stock, with more on the way. If you want I will put one aside for you. Just let me know when you want it. Shane.
grizz1 is offline