R/C Tech Forums - View Single Post - problem with lithium polymer Tuarnig '5000mah 40c
Old 04-02-2011 | 10:54 AM
  #1  
losiarie
Tech Rookie
 
Joined: Apr 2011
Posts: 6
Default problem with lithium polymer Tuarnig '5000mah 40c

Hello everyone
I have a problem with lithium polymer Turnigy 5000mah 40c 4 cell
I drive losi 8 with Mamba Monster v3 15181y 1800kv motor
After 10 minutes lift the batteries lose power Nygelsut
Mmbah Munster does not go cut off
I use with Orion Charger
Battery voltage after using balanced cell 15.6v
After loading a 53 min battery voltage 16.8v 1750mah with balanced cells
This problem exists in all my batteries 4 units
I ask what could be the problem?

Last edited by losiarie; 04-02-2011 at 10:27 PM.
losiarie is offline