Hi all,

I was cycling my cells yesterday, I'm getting 4600 on charge and 3300 on discharge, this is not too unusual particularly with older cells and after traying them to 0v there is always going to be some losses and I do find that NiMh's take a lot of time on the tray as compared to NiCd's. All of my cells that I have cycled so far are like this. If do not tray them to 0v then I will only get about 3800 on charge and will still get 3300 on discharge. Nothing unusual at all. I will however be verifying my charge and discharge currents soon, but I do not anticipate a problem.

The issue some one mentioned about changing the offset seventeen is to correct the charge current after changing the ROM to a newer version. This is very noticable as before the correction the charger will be charging at just over half the amps it thinks it is (approx) this therefore will mean the ridiculously high charge Mah numbers will be generated 6000+ sometimes. Changing the offset correct this.