Originally Posted by
jayh50
I have a SP Stock Club ESC that I am running in a VTA car and was trying to program drag brake into it, I was told that I needed a PRogram card to do this. I got one from a fellow racer at my local track and cant figure out how to get drag brake with it. The only thing it lets me change is the ThresholdV/cel lipo cut off, running operation and dynamic multi timing system. Is their something I am doing wrong or is this the wrong program card. Any information would be greatly appreciated.
The programmer card that you used from your friend is probably for the other cirtix ESC (like the short course master unit) the sticker on the slide out panel is not for your ESC....
If you are plugging into the card, you can only see 3 options...1, 2 and 3. If you can see more then 3 options, that is not a club spec ESC.
The options are below....
(1) Percent Braking - ABS 20% 30% 40% 50% 60% 70% 80% 90% 100%
(2) Percent Drag Brake - 0% 10% 20% 30% 40% 50% 60% 70% 80%
(3) Thermal protection - Enable Disable