Originally Posted by COBRARACING

Ok guys

some news we do have a new programming method and a new esc .

one will be our new 3 pin connector not associated with the rx port which will benefit you guys and not have to remove it from the receiver.

The other is a miniture blue tooth interface small enough to fit in you car (will be an option (smart phone applications will be available)
The lcd 2 in 1 will have a bluetooth interface to work with the car module.

The reson why we cannot build into the esc as the size will be big for the esc and because of noise as esc's do have high currents even on idle which would cause the esc to go offline all the time .The 1/8th scale esc because of it's massive size we will probably have the blue tooth built in but we need to see after testing if it will work .

The bluetooth unit will be very small the size of a fail safe unit .You will still have the option of direct plug in through the new connector direct to the 2 in 1 programmer .

so as you can see we are moving forward .All this will have patents attached to protect michael's and the teams hard work .

keep you all informed .this is probably going to be available late sep 2011 first prototype end of july .