R/C Tech Forums - View Single Post - Tekin RS ESC sensored

03-22-2011, 05:09 AM

#20038

jrxs-r

Tech Fanatic

iTrader: (11)

Join Date: May 2007

Location: Perth, Western Australia

Posts: 831

Trader Rating: 11 (100%+)

Quote:

Originally Posted by Mr. MR4

I am currently using these settings in 1/10 TC 2s lipo:

Gearing - 5.8
Motor Timing - 1 notch + timing (GM13.5 - 12.3mm rotor)
Throttle Profile - 4
Boost - 48
Start RPM - 2850
End RPM - 12000
Turbo - 13
Turbo Delay - 0.16
Ramp - 2
Throttle Minimum - Max

The issue I have is that from 1% to 50% throttle on my transmitter, the power delivered to the motor remains the same. After 50% the boost kicks in and at 100% throttle the turbo kicks in.

Is there any way I can get the 1% to 50% throttle to increase gradually?

Thanks

First off I would recommend decreasing you throttle minimum to around 0-5%, then increase your RPM range from let's say 7000 to 22000. Drop your motor timing to neutral or in the negative. Also, recalibrate the ESC to your TX again.

Try that and let us know.

Reply