I have a slightly used 10TT coming to me sometime this week and I'm trying to decide what electronics I want to run in it. I will mainly be running it on the local tracks just for fun, I'm not aware of any 10th scale 4wd truggy classes at the moment so I'm just after what would work best (without spending more than needed).
At the moment I have a complete system for 10th stadium truck I don't run at all. Its a Ezrun 60amp esc and Ezrun 9t 4300kv brushless motor. Its capable of running up to 3s and for that I have 2 5800mah 3s lipos that I would like to use for which ever setup I end up using. I'm thinking this system would be a bit on the small side for this vehicle and would more than likely run into temp problem and such.
I also have a spare Novak HV 7.5 brushless sensored motor. I was thinking of pairing this up with either a
Xerun 120A-SD sensored ESC or maybe a MMP.
Then I also have a Leopard 2350kv sensorless 8th scale brushless motor that I would pair up to maybe a
Ezrun 120a SC8 ESC or ???
Any ideas or suggestions on what I should use.
Also still looking for the battery tray size. The battery I have that I'd like to use is 149mm X 30mm.