Originally Posted by
mos-leung
i use DX3S in my TC5. i can read the temp/RPM of motor and voltage of LIPO at a time.
Please check the max input of voltage to SR3300T not over 9.6V!!
The LIPO as photo is not fully charged, so display only 6.4V.
If you have your ESC connected to your reciever then you are not monitoring battery voltage
The voltage you see on the screen is the bec circuit from the ESC, and it will not change regardless of your main pack voltage
As mentioned earlier in the thread, to monitor the actual pack voltage requires addittional components
Cheers