Originally Posted by
carl_Bennetts
Hi,
I have noticed my TC6 has quiet bad vibration when turning from half to full lock. This is mainly when at full speed. It seems with the wheels off the vibration isn't really noticeable but with the wheels on it's like the car is shaking apart.
Badly balanced wheels?
maybe the cvd's binding?
or is this normal when under load?
Thanks,
Carl
This seems to be a problem with the AE unis. Try running no set screw on the CVD and glue the retainer ring in place. This reduces vibration quite a bit.
You should set-up your car with about 70-75% (I go sometimes all the way to 85%) steering throw/ dual rate to minimize this further. If you are lacking steering, going to a more aggressive ackerman setting should give back the steering you are looking for.
On a side note, on asphalt the wheel chatter makes less of a difference than on carpet.