R/C Tech Forums - View Single Post - ezrun 60a esc problem
View Single Post
Old 03-13-2011 | 09:23 AM
  #6  
macavant's Avatar
macavant
Tech Addict
iTrader: (65)
 
Joined: Sep 2010
Posts: 705
From: RC dojo
Default

Originally Posted by Hitz1980
However when the car is put on the floor and I move the throttle very slightly forward, the car begins to move and then suddenly engages into near full throttle by itself, without me moving the stick on the controller all the way. this is quite dangerous and almost damaged my car!

Any ideas why or have a missed a setup???
My brother's car was doing something similar - this is how we fixed it:
1) re-calibrated the EPA of the Transmitter and ESC. max forward, max reverse, neutral.
2) With the use of the program card - the "Start Mode (punch)" setting was reduced from value 7 to value 2. "Timing" was reduced from level 5 to level 1.
The car now drives in a more linear rather than an on/off type of control.
macavant is offline