R/C Tech Forums - View Single Post - Anyone have dx2s telemetry issues regarding showing incorrect lipo battery voltage?
Thread: Anyone have dx2s telemetry issues regarding showing incorrect lipo battery voltage?
View Single Post
Old 03-10-2011 | 07:05 PM
  #8  
etivac13's Avatar
etivac13
Tech Fanatic
iTrader: (10)
 
Joined: Dec 2006
Posts: 892
From: indang/imus - cavite
Default
Originally Posted by Brazie
you are right. I noticed that I meant to say 8.4v regarding my 2s lipos. And going back to my original post, since im running two 2s lipos, i should be seeing 16.8v on my screen.

you're only going to see the 5.8V coming from the ESC.. not the battery voltage from your lipos...now if you connect your 2x2s lipos to your RX.. you will not see a 16.8V on your screen but would see smoke from your RX...

the 16.8V is the input voltage to your ESC... your ESC limits the voltage output going to your RX to 6V(in your case, 5.8V)...this is what your RX is measuring and is displaying...spektrum RX has an input voltage range from 3.8V to 9V...
etivac13 is offline  
Reply