Originally Posted by
isarctard
Thanks, but from your references of #11 & 20 thats the rear of the truck that's not even a T4.1. or to do with the front alum bulkhead. The tower hobbies do use the sizes you gave me, but I think AE information and part # is what Im going to use. I was not trying to debate you or try to say you are wrong just guide the next person who might ask this question to a part# to make it easier on them.
he was refering to the GT2 manual, in which steps #11 and #20 are correct. They list them as 4-40 set screws but I get nothing on Tower for the part number (7382) listed in the manual. Either way you don't NEED the set-screws, the pin is captured by the front brace and the hinge pin screw in the a-arm..I would go with what AE told you to order..