Originally Posted by
irgo
i like you M7H,
That's True Guys it's "60°" on version 3.0_110119
and what ever the timing is set to over 60 Steps ex:70, it's end is 60°
by completing the Priority it's the Boost first, or completing with the turbo if the full throttle is activated.
an excellent technologies that Michael build.
and Angelo have been showing the new 110211 (213)_STOCK Firmware
that it has "64°"
which is "4°" over timed than the theory 60°, it's a new secret.
Take the manual, and delete the word "Degrees" from the manual, and you have a more realistic explaination.
If 119 actually had 60deg, then I would have fried my motor along time ago.
1224: 0-38 Degrees, Turbo 0-16 Degrees (I always run 8)
0119: 0-60 STEPS, Turbo 0-40 STEPS.
With 119 you can run a total combination of 60 STEPS. Now if you can run 60 Steps of Boost, and 30 steps of Turbo.. Then you could get close to your 60 degrees, but that doesnt seem to be the case.
Micheal has already stated here on RC Tech 38deg of boost is 54 steps, so, at best you are getting 40 deg of actual timing.
Cheers,
Shawn.