hi guys im really after some help as i have the following problem...
i have a brand new nosram esc with a 7 turn motor limit and ive tried using this with a brushed 8 and 9 turn motor, upon setup the motor starts making a buzzing noise and wont turn when the throttle is applied on the handset dos anyone know the cause of this, the speedo is brand new and so is one of the motors, the new motor has them capacitors or diodes solderd to them so i didnt solder the ones supplyed with the speedo could this be the problem? the other motor doesnt have any on but im not to sure exactly where to solder them to, but in the past ive never had to solder these extra motor bit everytime i got a new speedo or motor IF this is the problem, if not does anyone know what else could be the problem? your help much apreciated jay