Originally Posted by
AndreC
Can anyone tell me what hex wrench sizes I need for this car?
As I previously posted in the Forum section on the CRC website:
For allen drivers:
.035" (included in LE kit) to drive 2-56 set screw stud into ball cup
.050"
.063" (1/16") for most screws
.078" (5/64") for front end camber adjustment
.093" (3/32") for rear wheel screws
2.5mm for motor mounting screws
For sockets:
3/16" (most nuts)
11/32" (rear axle/diff adjustment nut)
Hope this helps.
Bill