R/C Tech Forums - View Single Post - TLR 22 Racing Buggy Thread
View Single Post
Old 03-01-2011 | 08:47 AM
  #2290  
Casper's Avatar
Casper
Tech Prophet
iTrader: (34)
 
Joined: Aug 2004
Posts: 17,869
From: Orange, Ca
Default

Originally Posted by ajj
Just put one on order! But no Ti tie-rods as standard Oh well, can't wait to get my hands on it!!!

How does the weight distribution vary front to rear between the mid and rear setups?
The kit steel rods are not your normal RTR type steel tie rods. They are thick and strong. Titanium upgrades will save weight and add bling vs needing them for strength.

Originally Posted by billjacobs
I mean really, for $269 shouldn't it include the 3800 short lipo, an esc, a 10.5 brushless motor, a servo, and a futaba 4pks. If you want to sell the kit in today's economy, you really have to include some extras.

One more thing, please include an hour of lessons from a tlr factory driver. They can fly around the country giving lessons.

If you do all of the above, I will happily get the kit.

Thank you in advance. Oh, and if you include all of the above, I can buy the extra springs.
For $269 you basically get two cars in the box. Yeah you may not get all the tuning springs (at set of springs is only $5!) but you get all the parts in one box to run rear or mid motor. Big bore shocks and all the other innovative features of the 22. Most race kits don't come with all the tuning options so nothing new here. Get some tuning parts so you can adjust the car for your liking in all your different race conditions. If you are going to flip between configurations a bit it would probably be a good idea to get the extra parts to build seperate clips to reduce the turn around time between configurations.
Casper is offline