Originally Posted by ralphierace13

the reason mugen gave for moving the rec box to the otherside is, its too close to the clutch and the vibration can b causing a glitch, guys we posted bout this from day one, we have ran 5 mrx5's on the team and trust me we did alot of testing and praticing and racing we have not had 1 runaway, we posted we got some glitching from, we found wrong sized screws were used in the wrong spots and screws were touching, also locktight any screw in aluminum anything that comes loose can cause a glitch, we have not used double sided tape or made holes to cool the rec and we have not had a problem double check your whole car if u are getting glitching its something real small u are over looking......


also in about 2 weeks or so brookly hobbies will have new front upper arms and ball ends that will use a 4mm turnbuckle and replace the 3mm also the 4mm ball end and arm will be made of stronger plastic this should take care of the problem with the weekness, but if your not happy with that and your a driver that taps boards alot throu on the mrx4 front end... and dont use the 1mm washer under the steering rod on the knuckle