R/C Tech Forums - View Single Post - 1/8 scale electric battery question?
View Single Post
Old 02-14-2011 | 04:00 AM
  #4  
crusey_aus
Tech Master
iTrader: (3)
 
Joined: Jul 2008
Posts: 1,465
From: Melbourne, Australia
Default

Can be done but it really depends what motor (amp draw) you will be using

Without knowing the age / history of the packs you risk damaging them if your not careful

Essentially connecting them in series you will be creating a 4s 3800mah pack with a discharge rating of 25c (lowest of your two packs)

If you keep an eye on them when in use you can get away with it

Cheers
crusey_aus is offline