Originally Posted by fatcalves

Just got an RC8Be and will be converting it over to 1/10th Mod 4x4 SC.

Here are my electrics

-Tekin RX8

-Novak 4.5T 550

-7955 Servo

-Thunder Power 5200mah 2s 50c/100c Lipo

Will be running on a good size indoor high bite clay track. Tires will be Panther Switch (Clay)

*What would be a good pinon size to start with? I ran this same set up in my Jammin SCRT10 w/ a 13 tooth and sometimes the motor got a lil hot to the touch.

*And for initial set up should I try and use some set ups from the website or will it not work because I will be running 1/10th SC tires and SC8 shock towers.

Thanks!