Originally Posted by
daleburr
The Tamiya TRF ones are a perfect fit, been using these in my BD for the past year.
Tamiya and HB pistons fit BUT SHALL NOT BE USED!
The Yokomo shock body features a bigger inner diameter so if you use a tamiya piston the shock will get too soft as too much oil passes around the outside gap!
Originally Posted by
university_dave
As pack isn't an issue with touring cars if you're really struggling to find a 1.1mm drill bit you could drill 1 hole out to 1.5mm and leave the other two at 1.0mm as it makes the average hole size 1.17mm.
I'd still rather get a 1.1mm drill bit though.
unfortunately that is not the same.
Try to get a 1.10 drill from somewhere