R/C Tech Forums - View Single Post - Mamba Max set up
Thread: Mamba Max set up
View Single Post
Old 02-04-2011 | 09:43 PM
  #2  
crusey_aus
Tech Master
iTrader: (3)
 
Joined: Jul 2008
Posts: 1,465
From: Melbourne, Australia
Default
What motor and batteries are you using ?

If you are using the stock motor and decent batteries these are the settings I use

Auto lipo mode
Lipo cutoff 3.4v / cell
Brake 60%
Start power high

Everything else default

Set your throttle and brake travel at 100% in the radio, then calibrate the ESC to set the endpoints

Cheers
crusey_aus is offline  
Reply